Membrane
0102030405
HS Series 4/8 inch Anti-fouling High Salt Reverse Osmosis Membrane Components
Performance Characteristics:
The HS series reverse osmosis membrane components, developed by Qicheng Company for the desalination of high salt water, are polyamide composite membranes. These membranes showcase several outstanding features. They operate at low pressure while delivering a high water yield and excellent desalination performance. A special technology is employed to treat the membrane surface, which significantly reduces the deposition of pollutants and salts, thereby achieving an anti-pollution effect.
This makes them suitable for the desalination treatment of various water sources, such as industrial wastewater, high salt water, and recycled water, with a salt content of less than 20,000 ppm. Specifically, the 8-inch membrane is predominantly utilized in large and medium-sized industrial recycling of recycled water, municipal wastewater, and other water sources that contain a small quantity of organic pollutants or have a high salinity. On the other hand, the 4-inch membrane is particularly well-suited for the treatment of small-scale industrial recycled water, industrial wastewater, municipal wastewater, and other water sources that also contain a small amount of organic pollutants or have a high salinity.
Performance Specification:
| Product model | Effective membrance Area ft’(m³) | Inlet channel width (mil) | Water Yield gph(m³/d) | Stable Rejection Rate % | Minimum RejectionRate % |
|
QC-HS-8040 |
320(29.8) | 38 | 7300(27.6) | 98 | 97 |
|
QC-HS-4040 |
75(7.0) | 38 | 1800(6.8) | 98 | 97 |
1.The above test values are based on the following test conditions: 12000 ppm NaCl, at 320psi (2.2 MPa)25°C,PH7.5,10% recovery
2.The average water yield was measured, and the error of water yield of single membrane was within(±15%)