Leave Your Message
LP  Series  4/8  inch  Reverse  Osmosis  Membrane  Components  for Brackish Water

Membrane

LP Series 4/8 inch Reverse Osmosis Membrane Components for Brackish Water

LP series reverse osmosis membrane components are polyamide composite membranes developed by Qicheng Company for desalination of brackish water. They have the characteristics of low pressure operation, high water yield and good desalination performance.

    Performance Characteristics:

    LP series reverse osmosis membrane components are polyamide composite membranes developed by Qicheng Company for desalination of brackish water. They have the characteristics of low pressure operation, high water yield and good desalination performance. It is suitable for desalination treatment of surface water, groundwater and tap water with salinity less than 5000 ppm.Among them, 8 inch desalination membrane is mainly used for desalination and purification of large and medium-sized chemical, pharmaceutical, food, power plant, process water for electronic plant, boiler supply water, and municipal water. 4 Inch desalination membrane is mainly used in small-scale pharmaceutical, food, electronic factory process water, ultra-pure water, etc. It can also be used in desalination purification treatment in schools, communities and other water supply stations.

    Performance Specification:

    Product model Effective membrance Area ft’(m³) Inlet channel width (mil) Water Yield gph(m³/d) Stable Rejection Rate % Minimum Rejection

    Rate %

    QC-LP-8040-400 400(37.2) 32 10500(39.7) 99.5 99.3
    QC-LP-8040-420 420(39.0) 30 11000(41.6) 99.5 99.3
    QC-LP-8040-440 440(41.0) 28 11500(43.5) 99.5 99.3
    QC-LP-4040 85(7.9) 32 2400(9.1) 99.5 99.3
    1.The above test values are based on the following test conditions: 2000 ppm NaCl,ac 225psi(1.55 MPa)25°C.PII7.5.15% recovery
    2.The average water yield was measured, and the error of water yield of single membrane was within (±15%)
    3sj5